Picture StartOS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 70% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.

LFO 2 direct modulation amount for pulse width of square oscillator is 104.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 207.

Tone for oscillator 2 is set to 91 and is modulated by LFO 1.

LFO 1 direct modulation amount for tone for oscillator 2 is 210.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 15.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Wheel.

Mod Wheel mod-matrix 1 modulation amount for high-pass filter cut-off frequency is 97.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 799.95Hz (118) and is modulated by Note Vel, VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 102.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Note Num direct modulation amount for low-pass filter envelope amount is 209.

Filter resonance is statically set to 23% (58).

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±21 cents (106).

Oscillators drift level is manually set to 26. Drift rate is 0

Performance triggering timbre

Envelope triggering mode is set to re-trigger.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is manually set to 12.

Flange & Reverb fx

not yet complete


Mod Wheel modulator

Controls HPF Cut-off Frequency.

functiontypedestinationamount
timbre matrix HPF Cut-off Frequency 97

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 209

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 102
menu VCF Envelope Velocity Sensitivity 128
menu VCA Envelope Velocity Sensitivity 52

LFO 1 modulator

Controls OSC 2 Tone Modulation Depth.

functiontypedestinationamount
timbre fader OSC 2 Tone Modulation Depth 210
namevalue
LFO 1 Rate 2.09Hz (136)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync on
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 30

LFO 2 modulator

Controls OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
timbre fader OSC 1 Pulse Width Modulation Depth 104
namevalue
LFO 2 Rate 0.83Hz (104)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0.06s (11)
VCA Envelope Decay Time 1.13s (128)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 1.29s (139)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 102
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 16.34s (211)
VCF Envelope Sustain Level 0% (0)
VCF Envelope Release Time 1.57s (158)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0